RC Logger RC EYE One Operations Instructions download pdf (Page 29)

1. 

a double sound.

2. Put the throttle lever all the way back (engines out).

3. Resets the trims at the transmitter to “0”. For this, push the two associated trim buttons for rudder, nick



items 4, 6 and 7 of 88003RC (mode 2) Transmitter / items 4 and 6 of 88004RC (mode 3) Transmitter) in



4. 





short period at a correct reception signal (starter mode).

5. 

     

Model Bottom, items 2 and 4).

6. 

- 

- 

- 

7. 

because the landing legs may bet caught in the carpet easily.

8. Start the engines by carefully pushing the throttle lever forwards. Ideally, now slowly increase the speed

of the rotors (the throttle) of the “RC EYE One” until you can see a slight increase of altitude. Test the

roll and nick directions just before the “RC EYE One” starts to hover to ensure that the transmitter is



and in which direction the “RC EYE One” moves. By using trimming on the remote control, you can

prevent undesired movements.

Important! Never take off with a badly trimmed ight device.

9. Then increase the throttle until the “RC EYE One” is at least 50 cm above the ground. At this height, you



can be controlled more easily. Carefully try to correct a gentle drift with the trim levers for rudder, nick

or roll. Once the “RC EYE One” is high enough in the sky, decrease the throttle until the “RC EYE One”

hovers. Also observe the notes in chapter INFORMATION FOR FIRST TAKE-OFF.

10. Now you have managed the critical part and can familiarise yourself with the “RC EYE One” by slow and

careful throttle controlling motions.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

RC Logger RC EYE One Operations Instructions Page 29