RC Logger RC EYE One Operations Instructions download pdf (Page 11)

Charging the ight battery

Do not use any computer or notebook USB port to connect power to the USB charger

because it may be damaged. USB ports also usually are limited to a current of max.

500 mA.

Only use the battery included or the supplementary battery from 89029RC.

1. Use a suitable plug-in mains adapter or a cigarette lighter adapter with one USB output socket each

(output 5 V/DC, at least 1.5 A).

2. Connect the charger from the delivery (1) to a USB mains adapter (2) or a cigarette lights USB adapter

with its USB plug. The plug-in charger (or adapter) must have a current resilience of at least 1.5 A!

3. 

4. 

for this. If the battery is not defective (high-Ohmic/interrupted) and mains supply is warranted, charging

commences. This is indicated by the two red LEDs (3 = charge indicator).

The following LED displays are possible:

The red LED is permanently lit: The charging process is running

 Defective battery and/or bad contact of the plugs

The red LED goes off: Charging end is reached or no rechargeable battery or a fully

charged battery is connected

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

No comments

RC Logger RC EYE One Operations Instructions Page 11